Shielded signal cable 2 x 0.25 mm² / 24 AWG

Soft and flexible shielded signal cable suitable for switches, limit switches, probe signals and other low-current signal wiring on CNC machines.

For many standard installations, unshielded signal cable may work without any problems. However, if the machine is installed in an electrically noisy environment, or if you experience false triggering from switches or sensors, a shielded cable can help reduce interference.

This cable is a good choice for limit switches and other signal connections where extra noise protection may be useful.

Main specifications:

Cable type: Shielded soft signal cable
Conductors: 2 x 0.25 mm²
Approx. AWG: 24 AWG
Rated voltage: 300 V
Use: Limit switches, probe signals and low-current CNC signal wiring
Sold by: Meter

Typical use:

Limit switches
Home switches
Probe connection
Sensor signals
General low-current signal wiring

Note:

For normal installations, unshielded cable can often be used. Shielded cable is mainly recommended when you want extra protection against electrical interference.