You can build these saw stops however you want, the most important thing is the software and the electronics which should be of the closed loop type. With the closed loop system, you can hit the stop without losing position. The stop will return to its original position no matter how you turn it. The […]
Mach3 is the best control program for a CNC machine but it looks very outdated. We want to continue using Mach3 and have therefore made our own user interface to bring it into the 2020s. The interface we have created is stripped down and only has the buttons we think are needed. The buttons are […]
When the machine is in place and all the components are connected, you have to install software to control the machine. Starting from August 2021, we control the machines via USB with a module called UC100. Select the guide below depending on the software you selected to control the machine, Mach3 or UCCNC.Regardless of the […]
It is common to level tables on CNC machines as the top board is rarely completely straight. This is usually due to the material or that the machine is slightly skewed. If you only cut in 2-2.5 d, you usually do not need to level the table, but when engraving text or when you require […]
If it’s the first time you cut with a CNC machine, you can read the text below to get started. Regardless of whether you built or purchased your machine, you need software to run it. The work flow looks like this. Draw your part in, for example, CorelDRAW, fusion 360 or Google Sketchup. You can […]
