Product Description
Raw Creative 2.5 electrical kit
Complete electrical kit for the Raw Creative 2.5 CNC machine.
This kit is made for the standard Raw Creative 2.5 machine sizes: 750, 1000, 1500 and 2000. It includes the main electrical components, motors, drivers, cables, enclosure and wiring needed to build the complete electrical box shown in our instruction video.
The goal of this kit is to make the electrical part of the build much easier. Instead of sourcing all components separately, you get a matched package with the parts needed for a standard Raw Creative 2.5 setup.
Included in the kit
Motors and drivers
- 4x DM542 stepper motor drivers
- 4x NEMA 23 stepper motors, 3A
- 1x 350W / 14.5A switching power supply
- 1x control board / breakout board
Electrical enclosure
- 1x electrical enclosure
- 1x on/off switch with 10A fuse
- 1x emergency stop button
- Panel-mounted connectors for motors, switches and LED
- Probe connector / probe socket
Cables and wiring
- 18 AWG motor cable
- All required wiring for the electrical installation shown in our instruction video
- Cable for LED, probe, ground, switches and signal wiring
- Special board cables for easier installation
- 1x printer cable
- 1x USB cable
- Cable chain to fit the selected machine
Switches and accessories
- 4x proximity switches
- 1x 8P screw terminal
- 1x LED light
- Other required electrical parts needed to run the machine
Complete electrical box according to our video
The kit is designed to follow our Raw Creative 2.5 wiring video and includes the parts needed to build the complete electrical enclosure in the same layout.
Made for standard Raw Creative 2.5 builds
This kit is designed for the standard Raw Creative 2.5 machine sizes and follows our recommended electrical layout. Cable lengths and included parts are selected to match the chosen machine size.
Important note
This is a DIY electrical kit and must be installed according to the Raw Creative 2.5 instructions. Always check your wiring carefully before powering the machine.
If you are unsure about electrical installation, ask a qualified person for help.