This article will go through the whole machine and the different options. You can choose to build your machine with parts from us or others and have different type of electronics and drive systems, let’s go through it all. The first thing you need to do is to decide what type of machine you are […]
This section is for customers only. If you for some reason did not get access to this area, please contact us with your order number and we will unlock these pages for you.
This section is for customers only. If you for some reason did not get access to this area, please contact us with your order number and we will unlock these pages for you.
This section is for customers only. If you for some reason did not get access to this area, please contact us with your order number and we will unlock these pages for you.
![20180919_113904[1]](http://rawcnc.com/wp-content/uploads/2018/09/20180919_1139041-1-1000x500.jpg "Laser addon for Raw 1.5")
Laser addon for Raw 1.5 We don’t sell lasers since they are a bit to dangerous but if you still want to add one, here is a guide. When we started this project we were hoping for lasers that can cut through steel and thicker materials but we quickly realized that a system like that […]
Instead of buying a waste table from us you can make your own. We prefere 12mm Valchoromat but regular 12mm MDF will also work. Extended model The Extended table is cut in 3 pieces. The larger Extended XL (130x180cm) is big enough to cut one piece at the time, you can even cut half the […]
This section is for customers only. If you for some reason did not get access to this area, please contact us with your order number and we will unlock these pages for you.
Use these drawings if you are building Raw 1.5 EXTENDED CNC DIY kit You will find both video instructions as well as illustrations on this page. One tip is to open another browser tab with the same page so you can switch windows to see both video and illustrations. The Video instructions can be found […]
Use these drawings if you are building Raw 1.5 CNC DIY kit 100x100cm with Racks and pinions. You will find both video instructions as well as illustrations on this page. One tip is to open another browser tab with the same page so you can switch windows to see both video and illustrations. The Video […]
Instructions for assembling a standard Raw 1.5 machine with belts. If you have a Extended Machine, please refer to the article below. We have updated this product to make it easier to build the machine. Follow the video instructions to the actual X axis (horisontal axis). It is now pre-built with electricity and all, just […]
Use these drawings if you are building Raw 1.5 CNC DIY kit 100x100cm with timingbelts. You will find both video instructions as well as illustrations on this page. One tip is to open another browser tab with the same page so you can switch windows to see both video and illustrations. The Video instructions can […]
This section is for customers only. If you for some reason did not get access to this area, please contact us with your order number and we will unlock these pages for you.
