Upgrade package for Avantic and Avantic Extended (Not Creative)

From: 890

From: 890
SKU: N/A Categories: ,

Product Description

Delivery takes place at the end of August at the earliest.

If you want a smoother machine, better precision and higher strength on your machine, you can upgrade the machine with gearboxes, stronger motors and helical racks and gears. These parts are costly but make a big difference. Your machine is already prepared for these upgrades and only a few parts need to be replaced.

Upgrade 1. You can choose to use the existing electronics, rack and pinion and only upgrade to gearboxes with a 5:1 ratio. What comes with it are gearboxes for X.Y and A motor and new gears. You also get new parts so you can build in the motors as shown.

Upgrade 2. You can choose to use existing electronics and only upgrade to helical racks, Gears and gearboxes with a ratio of 5:1. What comes with it are beveled racks and gears, gearboxes for X.Y and A motor. You also get new parts so that you can build in the motors according to the picture.

Upgrade 3. Upgrade to helical racks, Gears and gearboxes with a ratio of 5:1. The electronics are also replaced with stronger engines (from 261.98oz.in to 425oz.in) and the electrical box is rebuilt to be able to handle the new engines. What comes with it are beveled racks and gears, gearboxes for X.Y and A motor. You also get new parts so that you can build in the motors according to the picture. This upgrade also includes new electronics in the form of stronger motors and electric box, which requires the electric box to be sent to us for rebuilding.

What will be the difference when upgrading?

Straight racks have slightly worse “Backlash” and higher mechanical noise. Straight racks vibrate more than Helical racks. If you change to Helical, the mechanical noise, vibrations and “Backlash” will be lower. If you are cutting wood, you will not notice much difference in cutting results, but you will notice that the machine has a smoother and quieter operation.

Gearboxes provide better precision and smoother operation. Acceleration is better, which affects inside corners when pocketing. With gearboxes, you don’t need to change the acceleration to get precise inside corners. You won’t notice a difference with normal cutting, but with precision and very small details, the result will be up to 4 times better.

When you have gearboxes on your machine, the speed is reduced quite a lot on the machine as the ratio becomes 5:1. You can compensate this with stronger motors so that you can increase the speed. If you do not need to increase speed above approx. 8000MM/min, you can use your existing motors.

Additional information

Select upgrade

Upgrade 1, Upgrade 2, Upgrade 3

Translate »