Machine taps DIN 371 Form C 35°RSP HSS-E VAP – M

From: 9,30

From: 9,30
SKU: N/A Category:

Product Description

High quality German taps with black oxide coating. You need good taps to thread steel and aluminum. Bad quality taps usually go off and it is almost impossible to get them out of the hole. Buy good taps if you are going to thread in steel or aluminum. We have tried many taps before we decided on this ones, they maintain a very high quality while being affordable.

You can use a screwdriver when you thread but keep in mind that if you’re stuck, the tap can go off. Set the screwdriver to torque setting so that the machine stops turning if you get stuck. Use grease or oil after each hole, regular cooking oil works well.


for general use

  • non abrasive material up to 900 N/mm²
  • unalloyed and low alloyed steel
  • for blind holes


  • improved adhesion of the coolant and Lubricant
  • reduces tearing of the lubricating filand the formation of cold welding

  Sizes: M3-M8 DIN 371



Additional information

Weight 0,1 kg
Ø (M)

M3x0.5, M4x0.7, M5x0.8, M6x1.0, M8x1.25

Translate »