Product Description
The package includes:
1 x 4 Axis TB6560 Stepper motor Driver card High speed optocoupler
1 x DB25 parallel cable
1 x fan
4 x M4 screw
4 x 23HS8430 stepper motor 270 oz, 76 mm, 3A
1 x 350W 24V / 14.5A AC power supply
1 x DB25 parallel cable
English instruction manual can be downloaded here
These driver bords are a cheaper alternative to the driver electronics that we use for eg. Raw 1.5. These boards work well and we think it is a perfect budget option. Note, however, that we have no guarantees on electronics like these as it is beyond our control how the user uses it. We know that the electronics work on delivery. These boards work with 12-36Volt power supply
Frame size: NEMA23
Step angle: 1.8 degrees
Current: 3.0A / phase
Resistance: 1.0 Ohm / phase
Inductance: 3.5 mH / phase
Holding torque: 180N.cm/18kg-cm 270 oz-in
Rotor inertia: 440 g-cm 2
Number of wires: 4
Weight: 1.10 kg
Length: 76mm
Shaft: single shaft, 6.35mm diameter, 21mm length
Power supply
350W, input: 100-120VAC or 200-240VAC, 50 / 60Hz, output: 24v / 14.5A, power supply with one output
Driver board
1. 4-wire 0-3.5A normally 3A, 3.5A is the peak current can be regulated speed current output, bipolar stepper motor.
2. Standard parallel port, supports Mach2 / 3, EMC2, KCAM 4 etc.
3. Optically isolated (IO) and DCDC power isolated to protect the PC’s parallel port and other equipment.
4. Restriction and emergency stop ports (standard DB9 port)
5. 4 working modes: mixed mode, fast mode, slow mode, standard mode 4 microstick: 1 1/2 1/4 1/16.
6. 12-36V single power input uses the switch’s power chip as 5V power supply, stable and low heat.
7. Uses RC + 7414 automatic semi-flow.
8. The relay output can control the main shaft.
9. 5th axis extension control port
